About Contact Us Free Shipping Safety Tips Beats By Dr. Dre Clubs VIP: Sign in  |  Register
Currencies:
Home / News > Frequently Asked Questions and Solutions for Audio Engineering Installation

News

Frequently Asked Questions and Solutions for Audio Engineering Installation

1. Signal distribution problem: There are several groups of speakers in the sound field, often use a balancer to distribute the signal to more than one amplifier to promote the speaker. But at the same time may also be different brands of amplifier and speaker mixed with the use of such a distribution signal to bring a lot of problems, the impedance can match the level of distribution can be balanced, the power of the speaker can be normal, and with a balance Difficult to adjust the sound field and the frequency characteristics of the speaker.

2. Illustration of the balance of the balancer to adjust the problem: common swallow-type mountain-type wave-type three spectral wave shape, the above waveforms are tuners artificial imagination of the graphics, in fact, is not the sound field of practical needs of the waveform, we know The ideal sound field frequency characteristic curve should be relatively flat, if the artificial imagination to adjust the sound field frequency characteristic curve, incredible the result is counterproductive.

3. Compressor adjustment problem: the common is to do the basic effect of the furnishings and the role of excessive reaction. The former can make do with the latter will bring a serious impact on the system dynamics, the performance of the sound is not out, the performance is the accompaniment of the voice of the more natural sound weakened so that the singer at a loss.

4. System level problem: First, the amplifier flexibility control switch to beats earbuds open the lack of second, the system did not do zero level adjustment. Sometimes the mixer channel to push a little bit of output has been great, this situation will affect the system dynamics and distortion.

5. Bass signal processing: the first does not do the electronic frequency with the full-frequency signal directly to the amplifier to promote the speaker; the second I do not know where to extract the bass signal from the system to do the disposal. Suppose not to do electronic frequency with the full-frequency signal directly to the amplifier to promote the speaker, although the sound of the speaker will not burn the unit, but the low unit of the whole sound is incredible; but if the system from the wrong position to get the signal will give Field control brings unnecessary trouble.

6. Effect loop disposal: should take the fader post-signal, to prevent the effect is not controlled caused by the microphone howling, return beats earphones to the conditions occupied by all the way channel, so debugging more convenient.

7. Line convergence process: the common system of communication interference is the line is not connected to the formation of the process is not well formed, there are balanced and unbalanced system to balance beats by dr dre the balance of the law must follow beats by dr dre the standard convergence. Also do not use inferior connectors.

8. Control problem: the console is the control center of the system, and sometimes the high and low EQ balance on the mixer to do the same substantial increase or attenuation is to clarify the system is not adjusted, the need to re-commission the system, do not over tune tuning Taiwan's EQ.